Key numbers
103 verified hail storms with stones of 1.5 inches or larger reached El Paso County, which includes Colorado Springs, from 2000 to 2025 in the storm records we keep; the largest measured 4.5 inches (softball size) on July 13, 2011 (NOAA NCEI).
| Hail storms by decade, 2000 to 2025 | 2000s: 35, 2010s: 44, 2020s: 24 Source: Storm library: El Paso County hail history |
|---|---|
| Largest hail | 4.5 in. (softball), July 13, 2011 Source: NOAA NCEI |
| Costliest hail storm | $352.8 million insured losses (2016 dollars), July 28, 2016 Source: RMIIA |
| 54.3% | According to Remodeling's 2025 Cost vs. Value Report, a metal roof replacement in the Mountain region cost $46,579 and recouped 54.3% at resale. Source: Remodeling / JLC (Zonda), 2025 |
| 7,500 | In Colorado State University burn tests at 7,500 feet, plywood charring under Class A asphalt shingles was about three times the area under metal roofing, and about twice under synthetic shake. Source: Colorado State University / EPiC Series in Built Environment, 2021 |
| 9.69 million | Metal was the main roofing material on 9.69 million U.S. homes in 2020. Source: U.S. Energy Information Administration (EIA), 2020 |
A storm counts when the library lists El Paso County among the areas it hit. Each hail size is the storm's largest report, which may have fallen in a neighboring county, and insured losses cover every area the storm hit.
Corrugated metal roofing is the right choice for barns, shops, garages, sheds, and covered arenas, and for homes where a rustic or farmhouse look is the goal. It is the most affordable metal roof and very durable, but the screws go through the face of the panel, so it needs periodic fastener maintenance that a standing seam roof does not. For most houses we recommend standing seam; for outbuildings, corrugated is hard to beat.
U-panel vs R-panel
- U-panel (classic corrugated) has the rounded wave most people picture. It suits homes, sheds, and accent walls.
- R-panel has taller trapezoid ribs and is stiffer, so it spans wider supports on shops, barns, and agricultural buildings.
Both are usually steel with a galvanized or Galvalume coating, either bare or painted.
Where we install it
On acreage properties in our service area, such as Black Forest, Falcon, and Peyton, corrugated panels are a natural fit for barns, shops, and loafing sheds, and in town for detached garages. On a house, the look works best on modern farmhouse, mountain, and ranch designs. Agricultural buildings and accessory structures have different code paths from homes; inside city limits, PPRBD requires a Class B minimum roof covering on accessory structures rather than the Class A required on homes.
Maintenance that keeps it leak-free
- Check fasteners and replace worn washers every few years.
- Keep debris out of panel laps and valleys.
- Look it over after hail: dents in the flat part of the panel are usually cosmetic, but dents at laps and fasteners can leak.
- Keep dissimilar metals, such as copper, from touching galvanized panels.
Snow and wind
Corrugated panels shed snow, so plan for where it lands, especially over barn and shop doors. PPRBD’s 130 mph design wind speed means fastener spacing and purlin attachment matter; we follow the panel manufacturer’s fastening schedule, tighter at the edges and ridge.
Corrugated or something else?
If you want the durability of metal without fastener upkeep, compare standing seam. For lifespan and price, see how long a metal roof lasts in Colorado Springs and our metal roofing cost guide. For a commercial or multi-tenant building, see commercial roofing. All metal options are on our metal roofing page.
Get a quote
Integrity Roofing and Painting is veteran-owned, family-run since 1990, BBB accredited with an A+ rating, and an Owens Corning Platinum Preferred contractor. Book a free inspection for your home, barn, or shop.
Sources: PPRBD, Reroof Guidelines (rev. 03/05/2024); PPRBD, Basic Design Information (updated 06/30/2026).
Photos From Our Projects
